Sell Helicopter Recharger(Li-ion/polymer balance charger)

Detailed Selling Lead Description When charging or discharging, B8 has an AUTO function that sets the feeding
current automatically. Especially for Lithium batteries, it can prevent the
over-charging that can lead to an explosion by users fault. Every program in
the unit is controlled with mutual links and communication for every possible
error for maximum safety. These can be set at user s option.
Best battery charger for R/C model products.
Special recharge plugs port for receiver, transmitter and igniter charger. And
for frequently used charger port such as multi purpose crocodile pin etc.
It provides most convenient balance charge port for Lithium batteries, with separated
2,3,4,5,6,7,8 charge port, and external reverse connector.
High-power and high-performance circuit
B8 employs the circuit that has maximum output power of 150W. As a result it
can charge or discharge up to 27 cells of NiCd/NiMH and 8 series of Lithium batteries
with maximum current of 7.0A. Furthermore the cooling system is so efficient
that can hold such a power without any trouble of running the CPU or the
operating program.
Individual voltage balance for Lithium batteries inside
B8 has an individual-cell-voltage balancer inside. This does not require any
extra balancer when charging Lithium batteries (Lilo/LiPo/LiFe) for cell voltage
balancing.
Balance individual cells on discharge
B8 also can monitor and balance individual cells of the Lithium battery pack during
the discharge process. If the voltage of nay one cell varies abnormally, the
process will be stopped with the error message.
Suitable for various types of Lithium batteries
B8 can accept three types of Lithium batteries-Lilo, LiPo and LiFe. They have
different characteristics by their chemistry. You can select any one of them that
you are going to process before the job. For their specifications, refer
Warnings and safety notes section.
Lithium battery Fast and Storage mode
You can charge Lithium battery for special purposes. Fast charge reduces
the charging time of Lithium battery and Storage mode controls the final
voltage of the battery to be suit for long time storage.
Maximum Safety
Delta-Peak Sensitivity: The automatic charge termination program works on
the principle of the Delta-peak voltage detection.
Auto-charge current limit: When charging NiCd or NiMH at AUTO current
mode, you can set the upper limit of charge current to avoid from high current
charging. This is very useful when charging the low impedance and small
capacity NiMH battery in AUTO mode.
Capacity Limit The charging capacity always calculated by multiple of the
charging current and time. If the charging capacity exceeds the limit the process
will be terminated automatically when you set the maximum value.
Temperature Limit The temperature of the battery on charging will rise by its
internal chemical reaction. If you set the limit of temperature the process will
be expired forcibly when the limit has reached.
Processing Time Limit You can also restrain the maximum process time to prevent
from any possible defect.
Input Power Monitor To protect the car battery using as input power from
being damaged the voltage of it always monitored. If it drops below the lower
limit the process will be ended automatically.
Data Store/Load
For users convenience it can store maximum 10 data of different batteries. You
can establish the data contains program setting of the battery to charge or discharge
continually. These data can be called out at any time you need and the
process can be executed without program setting.
Cyclic charging/discharging
Perform 1 to 5 cycles of charge?discharge or discharge?charge continually for
battery refreshing and balancing.
PC based analysis using USB communication
For technical expert, B8 offers PC based program can analysis the characteristic
of the battery by USB port. It shows a graph of voltage, current, capacity and
temperature curves. It also shows the individual voltage of each cell in the
Lithium battery pack.